常見問題
According to the requirements of install location and stroke range, select the most appropriate fitting dimension and stroke length.

A:Consider using condition, compare linear actuators’ specifications then select the most appropriate linear actuators.

A:Confirm the Duty Cycle is supposed to be lower 10%; it would reduce use life if the Duty Cycle was too huge. Check if there are any side force and other impacts; avoid these kinds of affects when using linear actuators
A:Duty Cycle = continuous use time/ (continuous use time + nonuse time) For example: Duty Cycle = 10% = 6min/ (6min+54min) The use life of linear actuators will be reduced when the Duty Cycle is more than 10%.
A:Holding Force: The force can stop heavy matter going down when linear actuators stop moving.

A:Select the most appropriate control boxes by linear actuators’ specifications and other options, such as number of channels, limited switches and handsets.

A : According to max. load and current of linear actuators.

A :No. Linear actuators won’t move or will be easily broken.

A :Standards can only move together because the PRM is not accurate enough. However, you can select the linear actuators, which have reed switch function, to have synchronism function.

A : Yes. Linkan Asia linear actuators use DC motors so the stroke direction will be incorrect.

A : Depends on linear actuators’ types. There are 3 general ways to control: interior limited switch, exterior limited switch, and MOL.

A:Yes. However, it must be controlled by control boxes’ MOL. Suggest using Linkan Asia products because they might be broken if no appropriate control.

A : No. Please contact our technical department if it is necessary.

A : None for standards but could install it if customers required. The power supply will turn off automatically if the surface temperature of motor is more than 70 degree; it will start running automatically if the temperature is less than 70 degree.

 

A : Yes. You can choose CB12 or CB16 series.

A : Because the DC motors of Linkan Asia linear actuators are under 24V; it doesn’t need UL certification for the DC motors under 24V.

A : Yes. You can use rockers or battery supply.